CREO-TECH

Intelligent Solution Through Automation

CREOTECH is a solution provider that helps to improve productivity and adaptable automation to enhance your facility efficiencies.

Automation

WOOL PILE INSERTING MACHINE

Specification

Product Name	Wool Pile Inserting Machine
Length	4600 mm
Width	770 mm
Height	1000 mm
Drive	Belt Mechanism
Clamping	Pneumatic clamping system

Features

This customized wool pile inserting machine is used in upvc profile.
In this spm we can insert wool pile automatically in (lh & rh) both side so we get maximum production.
This spm fully controlled by plc program and hmi

GANG DRILLING MACHINE

Specification

Product Name	Gang Drilling Machine
Spindle Motor	1 HP
Spindle Speed	1400 rpm
Total Travel	125 mm
Thrust Force	240@6 kg cm
Height	2120 mm
Weight	500kg
Clamping	TOP & SIDE Pneumatic

Features

This fully automatic multi head drilling can be controlled individually.
This customized spm machine main purpose is to drill three holes on upvc material with one hole offset of 53mm.
The characteristic of gang drilling machine depending upon the customer requirement.
Customized HMI for PLC controlling.

NAIL DECOLLATOR

Specification

Product Name	Nail Decollator
Electric Power	2 KVA,3P,210-230V
Air Supply	6 bar / 87 psi
Weight	1000
Width	650
Manufacturer	CREOTECH

Features

In one stock 25 nail will be removed from strip.
Grade material and rust protection coating used.

Description

Removing nail from recycling equipment for defective strip.

ASSEMBLY LINE CONVEYAR’S

Specification

Product Name	Assembly Line Conveyar's
Length	9.5 meter
Width	1000 mm
Height	900 mm
Drive	Chain & Belt
Weight	900 kg
Belt Width	32 mm

Features

This customized assembly conveyer machine is used for upvc window’s and door’s assembly work.
In this SPM we have 3 conveyer setup each conveyer belt can travel 3 meter.
After completing the 1st process , signal from operator object move to next conveyer for next process.
1st conveyer multi handling for bottom assembly work in object.
This SPM controlled by PLC program.
It has small conveyer in side 6 meter length it helps in moving small objects like tools and fastness.

Cutting Length Stopper Automation

Specification

Product Name	Cutting Length Stopper Automation
Length	4000 mm
Width	550 mm
Height	850 mm
Weight	150 mm
Drive	Belt Drive Mechanism
Motor	Servo With Gearbox

Features

Cutting Length Stopper Automation main purpose is to measure multiple sizes of a workpiece for cutting purpose.
Minimum 100 mm to maximum 4-meter workpieces to be achieved.
We can load cutting list data in program according to data cutting size will be maintained.
This Machine widely used for cutting measured length in various industries.
Hight adjustment 300mm, touched display monitor used.
Software for PC window fully Developed by LAPVIEW.
This SPM fully controlled by PLC Program.

STAPLER GUN

Specification

Product Name	Stapler Gun
Air Pressure	6bar / 87 psi
Air Inlet	1/4 “
Item Weight	1.650 kg
Stapling Capacity	100 pins
Packaging Details	Carboard box, Plastic
Power Source	Air Compressor

Description

Air staple gun ia a handheld machine used to drive heavy metal, staples into plastics, carboard box, etc.

4 X Stapler

Specification

Product Name	4 X Stapler
Air Supply	6 bar / 87 psi
Length	800 mm
Weight	80 kg
Height	600 mm
Width	800 mm
Manufacturer	CREO TECH
Operation Method	Pneumatic Air Foot Pedal

Features

4x Stapling machine can staple 4 side at same time.
In this machine 12 variety of corrugated box can be staple.
This machine can be used in packaging industries , plastic industries.

Description

Multi Stapling Machine.

Profile Punching Machine

Specification

Product Name	Profile Punching Machine
Cutting Material	Rubber, Plastic, UPVC Materials
Cylinder Capacity	1 TON
Air Source	6 bar/87psi
Operation Method	Pneumatic air foot pedal
Cutting Thickness	3 mm
Weight	150 kg
Length	500 mm
Width	400 mm
Total Height	1400 mm
Profile Load at	750 mm

Description

This machine has variety of cutter to cut the profile.
This machine applies to cut edge for plastic and rubber products
It has wide application in many industries like packaging, UPVS and plastic industry etc..,

Rotery Attachment for Plasma Cutting Machine

Specification

Product Name	Rotery Attachement for Plasma Cutting Machine
Motor	SERVO 1000 kw
Chuck	DIA 300 mm/ 12”
Length	6 meter
Width	700 mm
Height	900 mm
PROFILE
Max	12 meter
Min	1 meter
Rotation	360 °
Manufacture	CREOTECH

Description

This customized SPM can hold 300mm dia, 12meter profile and rotate 360 degree.

3 Axis Assembly Drilling

Specification

Product Name	3 Axis Assembly Drilling
Motor Speed	1 HP
Spindle Speed	3000 rpm
Length	2000 mm
Height	900 mm
Width	750 mm
Weight	155 Kg
Air Pressure	6-8 Bar

Features

This SPM is customized with individual drilling head for drilling assembled UPVC windows & door’s
X axis-1800mm and Y axis-150mm travel controlled by manually. we are using linear guide for smooth travel. X and Y Breaking will be controlling by pneumatic cylinder.
Z axis-150mm travel controlled by cylinder.
Pneumatic cylinder’s for clamping.
1800mm workpiece can be hold.
For locating drill bit position we use laser beam line
Our machines placed in plastic, upvc, aluminium industry’s for drilling purpose.

Gauge

Gauge Types

RECEIVING GAUGE
CONCENTRICITY GAUGE
PLUG GAUGE
NON STANDARD SPECIAL GAUGE
NON STANDARD SPECIAL GAUGE

Purpose

Components are manufactured as per the specified tolerance limits, upper limit and lower limit. The dimension of each component should be within this upper and lower limit.
If the dimensions are outside these limits, the components will be rejected.

Fixture

Features

A Fixture is an engineering device equipped to locate, hold, and support a product during a manufacturing operation.
Fixture components come in a variety of options that designers choose between depending on the workpiece and operation.
3D Concept designing and fixture manufacturing drawings.

Types

Assembly fixtures
Hydraulic and Pneumatic fixtures
Welding and Machining fixtures